Silaramic Brake System Grease Page 2 Silaramic Brake System Grease

CRC Industries is a worldwide leader in the production of specialty chemicals for maintenance and repair professionals and do-it-yourselfers, serving the automotive, heavy trucking, marine, hardware, industrial and aviation markets. CRC is ISO 9001:2008 certified and adheres to the strictest guidelines for quality in all facets of research, development and production. CRC , K&W , Sta-Lube , Marykate and products denoted with and are trademarks of CRC Industries, Inc. 2A0214PSS-8M 2014 CRC Industries, Inc. 800-272-8963 crcindustries.com Test Test Method Typical Results Dropping Point ASTM D-2265 None Flash Point ASTM D-92 550F Pour Point ASTM D-97 -50F Rust Preventative Test ASTM D-1743 Pass Corrosion (50 hrs. 5% Salt Spray) ASTM B-117 No Rust Bleed % (24 hrs. @ 212F) FS 791-321-2 .2 Water Washout @ 100F, % Loss ASTM D-1264 0.25 CRC SILARAMIC DRAMATICALLY REDUCES METAL-TO-METAL CONTACT BETWEEN OPPOSING SURFACES AND REDUCES NOISE Hydrodynamic lubrication failure and lack of noise reduction SILARAMIC prevents metal-to-metal contact under conditions of high loads and dampens noise. SILARAMIC reduced the High Frequency of Noise in the 14 kHz to 17 kHz range by 93%. SILARAMIC extended the life of the brake pads. During testing, the inboard brake pad had 49% less wear, and the total reduction in wear of inboard and outboard brake pads was 30%. SAE J2521 TEST RESULTS Test evaluated brake pad wear and braking noise - no lubrication versus SILARAMIC applied to all moving hardware and back of brake pads NON-BOUNDARY LUBRICANT SILARAMIC BRAKE SYSTEM GREASE

Previous Page