Food Zone Silicone Sealants Page 2 Food Zone Silicone Sealants

Customer Care: 800-272-4620 Technical Information: 800-521-3168 www.crcindustries.com/ei Your Best Solution CRC Industries is a worldwide leader in the production of specialty chemicals for maintenance and repair professionals serving industrial, electrical, aviation, automotive and marine markets. CRC is ISO 9001:2008 certified and adheres to the strictest guidelines for quality in all facets of research, development and production. CRC , K&W , Sta-Lube , Marykate and products denoted with and are trademarks of CRC Industries, Inc. 2015 CRC Industries, Inc. Made in USA Food Zone Silicone Sealants Directions Clean and dry all surfaces. Remove any oil and grease prior to application. Sealant adheres best to clean, unpainted surfaces. For a smooth seal, apply sealant at a 45 angle. Food Zone Silicone Sealant in the cartridge must be dispensed using a caulk gun (CRC part #14054). Cut tip of cartridge, screw-on applicator nozzle and cut nozzle to desired bead size. If further tooling is required, complete within 5 minutes. Remove excess sealant immediately with a dry paper towel. Normally sealant "skins" in 10 minutes, dries to the touch in one hour and fully cures and bonds in 24 hours. If gasket is not used in assembly, apply sealant to surface of one part and allow skin to form before assembling parts. After sealant is completely cured, excess material can be removed by trimming with a sharp blade. Avoid undercutting the sealant. Not recommended for use involving continuous immersion in gasoline or head gasketing operations. Application Fully cured Food Zone Silicone Sealant has excellent adhesion to glass, metal, porcelain, ceramic, wood, most plastics and many other non-porous substrates. Can be applied to surface temperatures from 0F to 120F and, after curing, withstands constant operating temperatures from -70F to 400F.

Previous Page